Well every topic needs a bit of an introduction to help you know more about what you are getting yourself into. And, thus in the same way I am going to give you a detailed introduction about what IP 10.0.0.1 is before shooting off to the more pro information in stock.
Well if you have come looking for IP 10.0.0.1 then there is very little chance that you may not be aware of what an IP address is. Hence, there is no use explaining what is an IP address here. We will straight away head to what is the business with 10.0.0.1 and what it can do for us or why is it actually in existence. And I am very sure of the fact that by the end of this article you will have a very good grasp over the 10.0.0.1 IP Address.
Introduction to 10.0.0.0.1
When it comes to IP Addresses and 10.0.0.1, it is better you have some knowledge about router and its contributions in the world of IPs. Thus, it is my advice that if you want to know everything about 10.0.0.1 explained here. It is better you go on discovering a few things about what a router is and what it does.
So, without any further delay lets head back to business.
What is IP 10.0.0.1 ?
In the most easiest term IP 10.0.0.1 is basically a default IP address. The term ‘default’ because whenever you get a router for yourself to access the Internet, it is always this 10.0.0.1 IP address that comes with your IP.
Let me elaborate this to you with a small walk through.
Firstly, when you first get an Internet Connection for your home or say company from your ISP (Internet Service Provider). It is normally recommended that you install a router too in order to access the Internet from any device. It is not really necessary to have a router, if you want to access the Internet. Although, you need a router if you want to connect multiple devices to a single network.
Now, this is where I would like to bring your attention to the modem which plays the main role in connecting your device or devices to the Internet so that you can access it and go on about browsing.
Most often people tend to confuse between what a router and modem is and what they actually do. So, the good news is once you clear than confusion between these two then understanding the rest of 10.0.0.1 is no big deal.
A MODEM is basically the device that your ISP provider will provide you and it is the device which will let you connect your device to the Internet. But, the main disadvantage in a modem is that it only allows one device to connect to the Internet. So, if you want to get some more devices connected to the Internet. Then this is exactly where the ROUTER jumps in.
A ROUTER will basically play the role of the middle man or a MOM. It ll give each of your device a seperate IP address or a name in case of how a MOM would name her children. Now all these device / children can access this ROUTER / MOM for getting the same thing. It basically depends upon the ROUTER / MOM now how it or she shares the resources or internet among the devices / children.
This, is where the 10.0.0.1 and the main part starts. Now, after you get yourself a router device. It is quite necessary that you get you can configure the router. Now, there are many such configurations you can configure in your router. Some of the most common configuration that you can manage are :
- DNS and Proxy
- Managing the network like in LAN,WAN and so on.
- DHCP client and many more.
But, now the main question is how do you access the router’s administration page. This is where 10.0.0.1 makes its final entry. Now, in order to access the router’s admin page all you need to do is simply type http://10.0.0.1 on your browser’s URL bar and Voila !!! You are straight away landed up to the admin page of your router. Now what changes you do here is all upto you. Still, you do need to follow some protocols here and there to configure your router well so that it runs smoothly and as you desire.
So, that is the main conclusion fellas. The IP 10.0.0.1 is mainly a [DEFAULT] IP set up by the manufactures of these routers. It is not necessary that all the manufacturing companies use 10.0.0.1 as the default IP of their routers. Some even tend to use 192.168.1.1 as the default IP addresses for their routers. Thus, overall 192.168.1.1 and 10.0.0.1 are the most commonly and widely used default IPs.
Cannot connect to 10.0.0.1 (default gateway)
Usually you should land up to the admin page of a router when you access the 10.0.0.1 default IP address of a router. But, many a times there are occasions when you simply cannot connect to the default gateway. There may be several reason to why you cannot access the default gateway. But, to name some of the most common reasons are as follows:
- Hardware Issues
Sometimes you may pick up a defective router which might not allow you to connect you to the default gateway. During such times it is a better option to try out a different router to know where the problem lies.
Also, there are times when a router might suddenly stop working or stop you from connecting to the default gateway. You can then simply go for troubleshooting and testing.
- Assigning wrong Device Address
Well you must always be carful while setting up your router. It is conventional and advised to set up a router with 10.0.0.1 as a static IP address. Doing this will allow other clients to access the address without any trouble
- Never assign the same address for a client and router
This is one of the most important thing to keep in mind while setting up your router and configuring it. If your router uses a DHCP (Dynamic Host Configuration Protocol) then it is really important to keep in check whether any device comprises of the same IP. Because, when such a IP conflict arises it causes network disabilities causing the temporary loss of connection.
- The ” CANT CONNECT TO 10.0.0.1 (default gateway)”
You will get this type of message mostly because either the device is not connected or there is a technical issue or simply because you are searching for the default gateway in the wrong Network. Only if the device or router is present within the same network as you are trying to access, only then can you access the gateway.
That is all there was to know about IP 10.0.0.1 (default gateway). I hope the information was what you came looking for. If you would like to add up some extra information or have some good advice for us to help us provide better data, feel free to comment under.
List of Default Username and Passwords
|Router Name||Default IPAddress||Default UserName||DefaultPassword|
|Cable & Wireless||Admin||1234|
|Ericsson (Formerly ACC)||netman||netman|
|Microsoft BroadbandNetworking Routers alsoknown as “Base Station” routers||192.168.2.1||admin||admin|
|Microsoft BroadbandNetworking Routers alsoknown as “Base Station” routers||n/a||admin|
|Speed Touch (Alcatel)||10.0.0.138||Administrator||n/a|